| SRS7WN[SS,UU]+[42-300/1]LM THK Miniature Linear Guide Caged Ball SRS Series | W:2,65 mm; Basic dynamic load rating (C):3,82 kN; Size (mm):50x75x77.6; h1:21 mm; D1:72 mm; d:50 mm; Weight:1,13 Kg; Width (mm):77,6; Bore Diameter (mm):50; Outer Diameter (mm):75; Bearing number:LME50OP; D:75 mm; θ:50 mm; B:77,6 mm; L:100 mm; |
| SRS7WNC1+[42-300/1]LM THK Miniature Linear Guide Caged Ball SRS Series | Wall Thickness (S3):0.047; ID Chamfer Angle (B deg.):30; Average Clearance (Cd):0.0021; Bore Diameter (mm):12,7; Shaft Dia., Nominal (d):0.5000; Bearing Bore after Mounting (di) - 0.5019:0.4992; Bearing number:AST50 08IB14; Bearing Type:straight; Material:Carbon steel shell w; Shaft Size (ds) - 0.49 |
| SRS7WNC1+[42-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | r2 min.:0,8 mm; Basic dynamic load rating (C):66,3 kN; Weight:0,423 Kg; d:41,275 mm; Outer Diameter (mm):76,2; Basic static load rating (C0):83,3 kN; Bearing number:24780R/24720; a:17,4 mm; B:23,02 mm; Width (mm):22,225; Size (mm):41.275x76.2x22.225; Calculation factor (e):0,39; D:76,2 mm; (Oil) Lub |
| SRS7WN+[42-300/1]LM THK Miniature Linear Guide Caged Ball SRS Series | Dimension P:1.0 in; Cor - Static Load Rating:183669 lbf; Maximum Speed:1450 rpm; Support Type:Round Flange; Bolt Size:4 x M24; Dimension V:0.1 in; Ca - Axial Load Rating:10206 lbf; Note:This product line wa; Seal Type:High Temperature Pac; Shaft Size:5.25 in; Bearing Type:Split Cylindrical Re; Dimen |
| SRS7WS+[33-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | B:16 mm; D2(min):61.7; Bore Diameter (mm):22; (Oil) Lubrication Speed:15000 r/min; a:2,46 mm; Weight:0,201 Kg; C:16 mm; Size (mm):22x56x16; f0:12.6; r min.:1,1 mm; b:1,5 mm; Dx(min):62.5; f:1,07 mm; r0 max.:0,4 mm; rb(max):0.5; Bearing number:63/22NR; d:22 mm; Cr:23.1; Width (mm):16; Outer Diameter |
| SRS7WN[SS,UU]+[42-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | B2:5.028 in; Sleeve:S-36; SNW/SNP Assembly Weight:17 lb; Bearing Number:23136K; Locknut:N-036; D1:8.255 in; Series:231K; Diameter d :6 7/16 in; Tolerance1:-0.005 in; S:1.219 in; Taper:1:12; Lockwasher and Lockplates:W-036; |
| SRS7WN[SS,UU]C1+[42-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Thrust Bearing:No; Retainer:Yes; Width:0.591 Inch | 15 Mill; Basic static load rating (C0):23,8 kN; Closed End:Not Applicable; Self Aligning:No; Bore:0.984 Inch | 25 Mill; Category:Needle Non Thrust Ro; Manufacturer Item Number:KT253515C3; Bore Diameter (mm):25; Outside Diameter:1.378 Inch | 35 Mill |