HCR15A[1,2,3,4,5,6]SS+[20-59/1]/400R THK Curved Linear Guide Shaft Set Model HCR
Brand Name: | THK |
Model Number: | HCR15A[1,2,3,4,5,6]SS+[20-59/1]/400R |
Series: | L558500 |
Cone Part Number: | L558548 |
Cup Part Number: | L558510 |
Design Units: | Imperial |
Bearing Weight: | 15 Kg |
Cage Type: | Stamped Steel |
d: | 320.675 mm |
D: | 406.400 mm |
PDF |
HCR15A[1,2,3,4,5,6]SS+[20-59/1]/400R |
Product Details
Series | L558500 |
Cone Part Number | L558548 |
Cup Part Number | L558510 |
Design Units | Imperial |
Bearing Weight | 15 Kg |
Cage Type | Stamped Steel |
d | 320.675 mm |
D | 406.400 mm |
B - Cone Width | 55.563 mm |
C - Cup Width | 38.100 mm |
B | 50.800 mm |
R - Cone Backface To Clear Radius1 | 3.300 mm |
r - Cup Backface To Clear Radius2 | 3.30 mm |
da - Cone Frontface Backing Diameter | 338.07 mm |
db - Cone Backface Backing Diameter | 338.07 mm |
Da - Cup Frontface Backing Diameter | 397.26 mm |
Db - Cup Backface Backing Diameter | 387.10 mm |
Ab - Cage-Cone Frontface Clearance | 1.5 mm |
Aa - Cage-Cone Backface Clearance | 2.3 mm |
a - Effective Center Location3 | 21.1 mm |
C90 - Dynamic Radial Rating (90 million revolutions)4 | 33400 lbf |
C1 - Dynamic Radial Rating (1 million revolutions)5 | 129000 lbf |
C0 - Static Radial Rating | 282000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 23300 lbf |
K - Factor7 | 1.43 |
e - ISO Factor8 | 0.41 |
Y - ISO Factor9 | 1.47 |
G1 - Heat Generation Factor (Roller-Raceway) | 1727.9 |
G2 - Heat Generation Factor (Rib-Roller End) | 396.2 |
Cg - Geometry Factor | 0.164 |