HR2042+[93-2200/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR
| Brand Name: |
THK |
| Model Number: |
HR2042+[93-2200/1]L[F(AP-C),F(AP-CF),F(AP-HC)] |
| Engineering Group: |
Mounted Bearing |
| Bearing Number: |
22214 |
| Shaft Size: |
60 mm |
| Shaft Size Type: |
Metric |
| Full Timken Part Number: |
QVVSN14V060SB |
| Locking Style: |
Double V-Lock |
| Weight: |
37.0 lb |
| Housing Style: |
Two-Bolt Pillow Block |
| PDF |
HR2042+[93-2200/1]L[F(AP-C),F(AP-CF),F(AP-HC)] |
Product Details
| Engineering Group |
Mounted Bearing |
| Bearing Number |
22214 |
| Shaft Size |
60 mm |
| Shaft Size Type |
Metric |
| Full Timken Part Number |
QVVSN14V060SB |
| Locking Style |
Double V-Lock |
| Weight |
37.0 lb |
| Housing Style |
Two-Bolt Pillow Block |
| UPC Code |
0883450177573 |
| Dimension A |
3.15 in |
| Dimension B |
6.18 in |
| Dimension C |
3.7 in |
| Dimension D Max |
9.25 in |
| Dimension D Min |
7.72 in |
| Dimension F |
10.83 in |
| Dimension G |
2.910 in |
| Dimension H |
1.38 in |
| Dimension J (Bolt Size) |
0.625 in |
| Dimension L |
3.50 in |
| Dimension RVV |
0.59 in |
| Dimension SVV |
4.09 in |
| C - Dynamic Load (Basic) |
47800 lb |
| C0 - Static Load |
52000 lb |
| e - Geometry Factor |
0.24 |
| Y1 - Geometry Factor |
2.90 |
| Y2 - Geometry Factor |
4.32 |
| Oil Lubrication - M/N Seal |
1700 rpm |
| Oil Lubrication - T Seal |
3050 rpm |
| Oil Lubrication - B/C/O Seal |
1400 rpm |
| Grease Lubrication - M/N Seal |
1700 rpm |
| Grease Lubrication - T Seal |
2600 rpm |
| Grease Lubrication - B/C/O Seal |
1400 rpm |
| Float |
0.083 in |
| Shaft Tolerance |
0.0015 in |
| Eng Internal Radial Clearance - Min |
0.0030 |
| Eng Internal Radial Clearance - Max |
0.0037 |
| Pre Install Clearance Min |
0.0030 in |
| Pre Install Clearance Max |
0.0037 in |