HCR45A[1,2,3,4,5,6,7,8,9]SS+[9-59/1]/1600R THK Curved Linear Guide Shaft Set Model HCR
| Brand Name: |
THK |
| Model Number: |
HCR45A[1,2,3,4,5,6,7,8,9]SS+[9-59/1]/1600R |
| Series: |
33014M |
| Cone Part Number: |
X33014M |
| Design Units: |
METRIC |
| Cage Type: |
Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1: |
60000 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2: |
15600 lbf |
| d: |
70 mm |
| B - Cone Width: |
31.000 mm |
| PDF |
HCR45A[1,2,3,4,5,6,7,8,9]SS+[9-59/1]/1600R |
Product Details
| Series |
33014M |
| Cone Part Number |
X33014M |
| Design Units |
METRIC |
| Cage Type |
Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 |
60000 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 |
15600 lbf |
| d |
70 mm |
| B - Cone Width |
31.000 mm |
| WPD |
104.5 mm |
| DD |
95.3 mm |
| R - Cone Backface To Clear Radius3 |
1.520 mm |
| da - Cone Frontface Backing Diameter |
77 mm |
| db - Cone Backface Backing Diameter |
79 mm |
| Ab - Cage-Cone Frontface Clearance |
3.6 mm |
| Aa - Cage-Cone Backface Clearance |
1 mm |
| a - Effective Center Location4 |
-8.6 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)5 |
39800 N |
| C1 - Dynamic Radial Rating (1 million revolutions)6 |
153000 N |
| C0 - Static Radial Rating |
236000 N |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 |
19400 N |
| K - Factor8 |
2.05 |
| G1 - Heat Generation Factor (Roller-Raceway) |
105.3 |
| G2 - Heat Generation Factor (Rib-Roller End) |
50.1 |
| Cg - Geometry Factor |
0.0985 |