36205.014 Rolling Mills BEARINGS FOR METRIC AND INCH SHAFT SIZES
| Brand Name: | Rolling Mills |
| Model Number: | 36205.014 |
| Bearing number: | 6900ZENR |
| Size (mm): | 10x22x6 |
| Bore Diameter (mm): | 10 |
| Outer Diameter (mm): | 22 |
| Width (mm): | 6 |
| d: | 10 mm |
| D: | 22 mm |
| B: | 6 mm |
Product Details
| Bearing number | 6900ZENR |
| Size (mm) | 10x22x6 |
| Bore Diameter (mm) | 10 |
| Outer Diameter (mm) | 22 |
| Width (mm) | 6 |
| d | 10 mm |
| D | 22 mm |
| B | 6 mm |
| C | 6 mm |
| a | 1.05 mm |
| b | 0.8 mm |
| f | 0.7 mm |
| r min. | 0.3 mm |
| r1 min. | 0.3 mm |
| D1 | 20.8 mm |
| D2 | 24.8 mm |
| Weight | 0.010 Kg |
| Basic dynamic load rating (C) | 2,49 kN |
| Basic static load rating (C0) | 1,13 kN |
| (Grease) Lubrication Speed | 33000 r/min |
| Enclosure | Single Shield with Snap Ring |
| Bore Type | Cylindrical Bore |
| Configuration | Single Row |
| Bore Size | 10 mm |
| Outside Diameter | 22 mm |
| Width | 6 mm |
| Fillet Radius/Chamfer | 0.3 mm |
| r1 | 0.3 mm |
| Snap Ring Width | 0.7 mm |
| Snap Ring Outside Diameter | 24.8 mm |
| D1 (max) | 20.8 mm |
| a (max) | 1.1 mm |
| b (min) | 0.8 mm |
| Dynamic Load Rating | 2,490 N |
| Static Load Rating | 1,130 N |
| Limiting Speed - Grease | 33,000 rpm |
| Limiting Speed - Oil | 38,000 rpm |
| Factor fo | 14.0 |
| Radial Clearance | 0.002 to 0.013 mm |
| da (min) | 12 mm |
| Da (max) | 20 mm |
| Dx (min) | 25.5 mm |
| ra (max) | 0.3 mm |
| Cy (max) | 1.5 mm |